Features:

1. This crystal humidifier is equipped with colored gradient lighting to create a rose light effect.

2. 1000ML and 500ML two large capacity design, no need to add water frequently. The opening of the bottle is enlarged and widened, and it is convenient to add water.

3. Humidifier adds the function of water shortage and power failure protection, USB charging design, one-button opening, convenient and safe use.

4. Quiet humidification Low noise, no disturbance, whether working or resting, can make the skin fresh and moisturized.

5. Suitable for family, yoga, office, spa, bedroom, baby room, desktop and other scenes

Operation steps:

1. Spray operation: After adding water, first soak the cotton swab (wait for 2 minutes) and turn on the power. Click the button: Enable continuous injection mode - Intermittent injection mode (spray for 3 seconds, stop for 3 seconds)- Disable all injection modes. (So cycle)

2. Night light operation: long press for 2 seconds to turn on white-RGB color change -RGB fixed color (when RGB becomes your favorite color, press the fixed color for a long time) off (this cycle)

3. Anti-dry burning: automatically stop spraying when the spraying time is up. If you need to continue to use, please observe whether the water in the tank is sufficient (at least 2/3 of the water), and then restart the spray function to continue to use

Specifications:

Product name: Crystal rose lamp humidifier

Product power :3W

Rated output :5V-2A

Tank capacity :1L/500ML

Product material :ABS+PS

Lighting: 7 colors RGB

Charging method: USB

Packaging:

Humidifier *1

USB*1

Instructions *1

Note:

1. Due to manual measurement, please allow 0-1cm error. Before you bid, make sure you don't mind.

2. Due to differences between different monitors, the picture may not reflect the actual color of the item. Thank you very much!

3. Before using this product, please add water (keep at least 2/3 of the water), take out the cotton swab and soak (cotton swab soak) for 2-3 minutes before installing the cotton swab, ensure that the cotton swab is attached to the top of the atomizer, and then turn on the humidification function. Do not use the humidification function in the case of no water to prevent dry burning damage to the atomizer

4. When adding water or replacing cotton swabs, be careful not to lose or remove the bottom of the spring

5. This product is not waterproof. During use, avoid tilting the mouth of the cup, resulting in water overflow. When cleaning the product, please do not rinse the part containing the circuit in the connecting top cover with clean water to avoid short circuit caused by the product entering water.